FDMS
for Exchange provides a complete system with facility of splicing,
termination, distribution, identification with complete wiring with
pig tails & patch cords. It provides a flexible cable management
system using a variety of shelves. It provides management of very
large volume of optical fibres of ribbon and non-ribbon type cables
with flexibility & reliability in all environment of access
network. |
|
|
| Features |
|
- Convenient modular design accepts variety of configurations.
Mass customization possible.
- Robust & rigid construction
- High reliability and long service life.
- Main body constructed from internal stress free CRC sheet
- Powder coated finish enables operation even I coastal areas
- Lockable doors to ensure security
- Spring loaded door hinges for easy removal of doors for quick
and easy access of the system.
- Dust and insect proof
- Grouting and leveling facility
- Capable to take in 12 nos. of outdoor optical fibre cables
from top or bottom of the rack
- Excellent cable clamping & FRP holding arrangement
- Provision for 12 shelves, which can be configured into fibre
Splicing, Patching & Splicing cum Patching shelves by adding
different available modules as per user’s requirement
- Two Horizontal Patch Cord Management (HPM) shelves provided
with system
- All shelves are mounted on telescopic slides for easy push-pull
operation
- Each Splicing shelf can hold upto 36 splicing trays
- Each Patching & Splicing cum Patching shelf can hold upto
6 trays for respective operations
- Top tray in each Patching & Splicing cum Patching shelf
is covered by tray cover
? Complete kit with consumables available.
|
| Splicing cum
Patching Shelf |
|
- Specifically suitable for Ribbon type of Optical Fibre Cable
- Single piece moulded body
- Constructed from ABS
- Well protected from accidental & malicious damages
- Capable of holding 12 numbers of FC / SC / ST or LC type adaptors
- Splicing area available on both sides of the tray
- Push fit arrangement for fixing the splice holder on the tray
-
Each tray has a predefined place on both
side of the tray for fixing the transition block of the Fan
Out unit
-
Tray is designed to store fibre splices
and extra length of fibres in systematic & secured manner
without change in attenuation
- Protects minimum bend radius of each optical fibre
- Pre-installed identification system for total end to end traceability
|
| Patching Shelf |
|
- Single piece moulded body
- Constructed from ABS
- Well protected from accidental & malicious damages
- Capable of holding 12 numbers of FC / SC / ST or LC type adaptors
- Patching tray is designed to store extra length of pigtails
in systematic & secured manner without change in attenuation
- Protects minimum bend radius of each pigtail
- Pre-installed identification system for total end to traceability
|
| Splicing Shelf |
|
- Suitable for all types of single Fibre OF Cables
- Single piece moulded body
- Constructed from ABS
- Push fit arrangement for fixing the splice holder / fan out
transition block on the tray
- Pre-defined place for fixing splice holder / transition block
of the fan out unit
- Designed to store fibre splices and extra length of fibres in
systematic & secured manner without change in attenuation
- Protects minimum bend radius of each optical fibre
- Pre-installed identification system for complete end to end
traceability
- The capacity of each splice tray can be determined by the type
of splices stored in each splice tray. Each tray can be configured
to accommodate splices of:
|
-
12 fibre ribbon with 12 fibre ribbon / individual
fibre splices (2 splices stored in each tray-single circuit
/ element basis)
-
12 fibre ribbon with 12 individual fibres
(12 splices in each tray)
-
12 individual fibres with 12 individual fibres
(12 splices in each tray)
|
| Applications |
|
- Long distance Optical Transmission Network
- Datacomm Network
- Management of large volume of fibres
|
| Specifications |
|
- Height (mm): 2200±2%
- Width (mm): 900 ±2%
- Depth (mm): 300 ±2%
- No. of cables: 12
|
